SHARE
Best Meizu Store:

 1.jpg

Meizu MX6 VS Letv pro3 : Flyme 5.2 VS EUI 5.8

Meizu MX6 VS Letv pro3

Meizu MX6 running depth customization Flyme 5.2 system based on Android 6.0, the overall operation is relatively smooth. However, this version of system did not add too much new features, and does not support interaction 3D Touch pressure. The biggest change is that add new Meizu see application, the application can be downloaded directly in the software store. While Letv Pro3 run EUI 5.8 system based on Android 6.0, using the current popular flat design style.

Meizu MX6 equipped with MediaTek ten core Helio X20, with 4GB LPDDR3 RAM plus 32GB eMMC 5.1 ROM. It is worth mentioning that the Helio X20 integrated all the Netcom Cat 6 baseband, it allows Meizu MX6 support 6 modulo 18 frequency of the whole network, with the newly designed antenna module, the main / vice antenna can automatically switch, and the signal is still very stability.

Meizu MX6 VS Letv pro3

Letv Pro3 uses snapdragon 821 processor, in addition to the RAM / ROM portfolio also has four versions, namely 4 +32 GB, 4 +64 GB, 6 +64 GB and 6 +128 GB.

Meizu MX6 front camera is 5 million pixels, use of OV5695 sensor, aperture, rear camera with the same as F2.0, support for intelligent beauty and facial exposure enhancement algorithm. And the rear camera use of Sony Exmor RS IMX386 stack sensor phone, the pixel is 12 million, the unit pixel size is 1.25μm, the internal integration of high-density phase detection pixels, even in low light shooting performance or focus speed both are excellent. The lens has 6P mirror design, anti-glare ability is also great.

Meizu MX6 VS Letv pro3

Letv Pro3 equipped with a 8 megapixel front camera, with 1.4μm large pixels, aperture for the F / 2.2, and join 76.5 degrees wide-angle lens, so that the self-timer can cover more area. The rear camera uses Sony’s popular IMX298 sensor, with 16 million pixels (1 / 2.8 inch, unit pixel size 1.12μm), use of DTI pixel isolation technology to reduce the interference between pixels and improve noise control capabilities.

Meizu MX6 takes 5.5-inch 1080P LCD screen, using 2.5D curved glass, TDDI touch display technology integrated touch and display driver in one chip, you can reduce the running power consumption and improve the display performance, but it does not support Screen pressure sensing technology. And Letv Pro3 with 5.5-inch 1080P resolution screen, takes 2.5D curved glass, increase the visual sense of shiny and enhance the touch of smoothness. The metal back cover with a metal wire drawing process, body metal area accounted for 98%.

NO COMMENTS

LEAVE A REPLY


*